PENGARUH VARIASI TEMPERATUR PEMANAS DAN MEDIA PENDINGIN TERHADAP TINGKAT KEKERASAN BAJA ST 42

Arif Rizki Gunawan, Nely Ana Mufarida, Asmar Finali

Abstract


Progress of science and technology is very rapid, making the industry plays an important role in it. Existing industries will not be separated from the use of metals, especially steel. This is evidenced by the many uses of steel in various machine components, work materials, building construction, both in the form of plates, sheets, pipes, profile rods and so on. Wear is the most dominant factor in damage to machinery functions, which results in reduced service life and the performance of various engine components and indirectly increases maintenance costs. This study aims to study the effect of heating temperature variations and cooling media on the hardness level of steel st 42, where the cooling media uses oil SAE 20W-50 and dromus oil. The time for the buffer for 60 minutes, 90 minutes and 120 minutes, uses rockwell testing. The value of hardness testing on ST-42 steel obtained from the heat treatment process obtained the highest average value in specimens with a temperature of 700ᵒC cooled with oil SAE 20W-50 cooling media and had a hardness value of 94.7 HRC which increased by about 4.7 HRC from the average value the highest average for dromus oil cooling media which at a temperature of 750 ᵒC is 92.0 HRC.

Full Text:

PDF

References


Alfani Wili. 2016. Pengaruh Variasi Temperatur Pada Proses Pack Carburizing Terhadap Ketahanan Aus Baja St 41. Skripsi tidak diterbitkan. Fakultas Teknik Universitas Lampung Bandar

Lampung 2016.

Bahtiar, Iqbal M dan Supramono, 2014, Pengaruh Media Pendingin Minyak Pelumas SAE 40 Pada Proses Quenching dan Tempering Terhadap Ketangguhan Baja Karbon Rendah, Jurnal Mekanikal, Vol.5 No.1, Januari. (455-463).

Firman M., Hatif M., Dan Herlina F., 2016, “Analisa Kekerasan Baja St 42 Dengan Perlakuan Panas Menggunakan Metode Taguchi”, Jurnal Teknik Mesin UniskaVol. 01 No. 02.pp.(1-3).

Feby, M.K dan Indro, A.S, 2017,Studi Uji Kekerasan Rockwell

Superficial Vs Micro Vickers, Jurnal Teknologi Proses Dan Inovasi

Industri, VOL.2, NO.2, November. (85-89).

I Ketut Rimpung, 2016, Pengaruh Perlakuan Panas Terhadap

KekerasanBaja (St. 42) Dengan Temperatur Pemanasan 800◦C,Metode Brinell, Di Laboratorium Uji Bahan Politeknik

Negeri Bali, Jurnal Logic, Vol.16. No.2, Juli. (87-91).

I Ketut Rimpung, 2017, Analisis Perubahan Kekerasan Permukaan Baja (St. 42) Dengan Perlakuan Panas 800◦C Menggunakan Metode Vickers Di Laboratorium Uji Bahan

Politeknik Negeri Bali, Jurnal Logic, Vol.17. No.1, Maret. (67-72).

Lutfi Abdillah, 2016,Pengaruh Flame Hardening Dengan Jenis

Pendingin Terhadap Kekerasan Permukaan Baja St 42, JTM, Vol.04. No.03, Januari. (111-115)

Nanse H., Nevada J.M., Dan Steanly R.R., 2011, Analisa Keragaman Nilai Kekerasan Baja St-42 Melalui 8 Proses Karburasi Menggunakan Komposisi Baco3 Dan Carbon Dengan Variasi Waktu Penahanan, Arika, Vol. 05, No. 2, Agustus.(100-107)

Setiawan Hera .2012. Pengaruh Proses Heat Treatment Pada

Kekerasan Material Special K (K100). Vol.2. No1.(2-6)

Syarief Achmad, 2006, Uji Kekerasan Baja Konstruksi St-42

Pada Proses Heat Treatment, Info Teknik, Volume 7 No. 1, Juli. (48 – 55)


Refbacks



Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.