Proses Maintenance dan Standarisasi Panel Kontrol Listrik Pada Mesin Press Chin Fong CCP 100 di PT Ciptaunggul Karya Abadi

Ahmad Syahlan, Dian Budhi Santoso

Abstract


Perawatan mesin dalam sektor manufaktur merupakan aspek penting guna menjaga mesin bekerja optimal. Mesin Press Chin Fong CCP 100 digunakan untuk melakukan finishing press dies. Komponen panel kontrol listrik menjadi salah satu yang krusial dalam penggunaan mesin karena berfungsi sebagai pusat kendali kelistrikan. Dengan mengetahui alur proses maintenance dan standarisasi yang dilakukan dapat membantu memahami cara perawatan dengan efektif. Metode penelitian yang digunakan yaitu studi lapangan, wawancara, diskusi, dan studi literatur ditujukan untuk mengidentifikasi proses maintenance, permasalahan komponen, dan standarisasi pada panel mesin. Corrective Maintenance diterapkan pada perawatan panel listrik, tetapi pemeriksaan harian panel kontrol mesin termasuk ke dalam Check Sheet harian sebelum mesin dioperasikan. Pemeriksaan termasuk ke dalam beberapa proses seperti, pembersihan, pengecekan wiring kabel dan konektivitas grounding. Temuan komponen yang mengalami kerusakan jika melebihi jam kerja maksimal selama 12 jam yaitu komponen kontaktor dan mondaktor DH yang sering turun dengan faktor utama usia penggunaan komponen. Standarisasi yang dilakukan dengan melakukan perhitungan arus maksimal motor dan penggunaan ukuran kabel untuk wiring motor pada panel. Dengan standar besar arus nominal motor maksimalnya yaitu 11,335 A dan penggunaan kabel dengan ukuran 2.5  bertujuan mengutamakan safety untuk sistem kelistrikan panel mesin.

Keywords


Mesin Press; Panel Kontrol Listrik; Corrective Maintenance

References


M. Jannah, S. Mulyadi, and H. A. Notonegoro, “Tensile Strength of Potent Cars Bumpers Materials from The Woven Ramie Fiber,” FLYWHEEL : Jurnal Teknik Mesin Untirta, vol. 8, no. 2, p. 32, Nov. 2022.

Badan Pusat Statistik, “Perkembangan Indeks Produksi Industri Manufaktur 2022,” Jakarta, Aug. 2023. Accessed: Jan. 21, 2024. [Online]. Available: https://www.bps.go.id/id/publication/2023/08/31/5e4e151b11a295b0e8e2455d/perkembangan-indeks-produksi-industri-manufaktur-2022.html

Ľ. Šooš, “Research and Development of the New Progressive Construction Press Machines,” in Renewable Energy-Technologies and Applications, IntechOpen, 2020.

S. S. Sable, Vinay Bonde, Bhushan Dhangar, Sandesh Patil, and Shriniwas Satpute, “Analysis and Advance Implementation of Automatic Power Factor Corrector Unit (APFC) for an Industrial Application,” International Journal of Advanced Research in Science, Communication and Technology, vol. 2, no. 1, pp. 413–420, Mar. 2022.

D. A. Susanto, “Preventive Maintenance Komponen panel Kelistrikan Pada Mesin Stamping Press Mekanikal JW31-500t PT. Sebastian Jaya Metal Jababeka Cikarang,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 11, no. 3s1, 2023.

A. V. Prasmoro, “Analisa sistem perawatan pada mesin las MIG dengan metode Failure Mode and Effect Analysis: Studi kasus di PT. TE,” Jurnal Operations Excellence: Journal of Applied Industrial Engineering, vol. 12, no. 1, pp. 13–27, 2020.

H. Pujiyanto, “Metode Observasi Lingkungan dalam Upaya Peningkatan Hasil Belajar Siswa MTs,” JIRA: Jurnal Inovasi dan Riset Akademik, vol. 2, no. 6, pp. 749–754, 2021.

W. Hu and J. Liu, “Optimal bilinear control of a reparable multi-state system,” Int J Control, vol. 95, no. 4, pp. 851–866, Apr. 2022.

S. U. Haq, C. Schartner, and M. T. Moorthy, “Understanding Alternative Methods of Machine Online Condition Monitoring; An Investigation Based on Years of Experience and Field Case Studies,” in 2021 IEEE Electrical Insulation Conference (EIC), IEEE, Jun. 2021, pp. 30–33.

S. Ren, W. Tang, Z. Kang, and H. Geng, “Numerical study on the axial-torsional response of an unbonded flexible riser with damaged tensile armor wires,” Applied Ocean Research, vol. 97, p. 102045, Apr. 2020.

X. Huang and Y. Nakamura, “A Review of Fundamental Combustion Phenomena in Wire Fires,” Fire Technol, vol. 56, no. 1, pp. 315–360, Jan. 2020.

D. K. Mahanta and O. Andrew, “Transformer Dielectric Liquid: A Review,” in 2020 IEEE PES/IAS PowerAfrica, IEEE, Aug. 2020, pp. 1–5.

G. M. Taha, L. S. Nasrat, and G. S. Younes, “Improvement of Some Chemical and Electrical Properties of Aged Transformer Oil using Eco-Friendly Fillers,” Aswan University Journal of Environmental Studies, vol. 1, no. 2, pp. 137–146, 2020.

Y. Weng, Y. Zhao, and J. Shi, “Analysis of Electrical Control System Based on Automated Captive Cleaning Equipment,” IOP Conf Ser Earth Environ Sci, vol. 692, no. 2, p. 022063, Mar. 2021.

M. S. Azis, I. Sulistiyowati, A. Ahfas, and I. Anshory, “Dust Cleaning System on Panel PET Preform Injection Machine BM500,” Procedia of Engineering and Life Science, vol. 2, no. 2, Sep. 2022.

R. A. Wiguna, “Evaluasi Penerapan Metode Pentanahan Netral Resistansi Tinggi pada Generator di Pltd Sungai Raya,” Jurnal Teknik Elektro Universitas Tanjungpura, vol. 2, no. 1.

S. A. Palake and S. P. Diwan, “Nuisance Tripping Failure Modes and Corrective Actions in Molded Case Circuit Breaker,” in 2020 IEEE International Students’ Conference on Electrical, Electronics and Computer Science (SCEECS), IEEE, Feb. 2020, pp. 1–5.

Z. Liao, Q. Wang, and X. Li, “Effect of Gassing Material on Partial Discharge Characteristics in MCCB,” in 2022 IEEE 67th Holm Conference on Electrical Contacts (HLM), IEEE, Oct. 2022, pp. 1–7.

H. Makhabbah and A. I. Agung, “Rancang Bangun Sistem Monitoring Konsumsi Daya Listrik Dan Pemutus Daya Otomatis Berbasis Internet,” Jurnal Teknik Elektro, vol. 9, no. 1, 2020.

S. W. Shneen and G. A. Aziz, “Simulation model of 3-phase PWM rectifier by using MATLAB/Simulink,” International Journal of Electrical and Computer Engineering (IJECE), vol. 11, no. 5, p. 3736, Oct. 2021.

A. Radiansyah and A. Gifson, “Inspeksi Overhaul Motor Induksi 3 Fasa 1000 KW di PT. Mesindo Tekninesia,” TESLA: Jurnal Teknik Elektro, vol. 21, no. 2, pp. 100–112, 2019.

G. Forstner, A. Kugi, and W. Kemmetmüller, “Fault-tolerant torque control of a three-phase permanent magnet synchronous motor with inter-turn winding short circuit,” Control Eng Pract, vol. 113, p. 104846, 2021.

O. V. Streltsova, A. S. Bondar, and V. V. Ishin, “Simulation of Cable Heating Depending on Current Harmonic Composition,” in 2020 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus), IEEE, Jan. 2020, pp. 900–903.




DOI: https://doi.org/10.32528/elkom.v6i1.22413

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Teknik Elektro dan Komputasi (ELKOM)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

View My Status                                                                       Indexing Service

                              

UNMUH

   Publisher :
   UNIVERSITAS MUHAMMADIYAH JEMBER
   Jl. Karimata No. 49 Jember 68121 East Java
   Website : www.unmuhjember.ac.id
   Email : kantorpusat@unmuhjember.ac.id

Editorial Address :
Electrical Engineering
Faculty of Engineering
UNIVERSITAS MUHAMMADIYAH JEMBER
Jl. Karimata No. 49 Jember 68121 East Java