PURWARUPA SISTEM PARKIR CERDAS BERBASIS ARDUINO SEBAGAI UPAYA MEWUJUDKAN SMART CITY

Catur Iswahyudi, Argo Rudi Prasetyo, Andung Feby Prakoso, Muntaha Nega

Abstract


The prototype design of smart parking system based on arduino aims to facilitate the officer in parking management and also help the driver to know the location of the available parking slot. This prototype consists of four main components: ATMega8535 microcontroller, ultrasonic sensor, servo, and LED. The ultrasonic sensor will detect every object that enters the parking area and sends the result to the ATMega8535 microcontroller for calculation. The results of the count then compared with the capacity of the parking area. If the result is equal to the capacity of the parking area, the microcontroller will send the instruction to the servo to close the entrance bar. And if there is a change as there is an out, then the microcontroller will recalculate the incoming data. If the result count less than parking capacity, then the microcontroller will send instructions to the servo to open the entrance bar.

Keywords: smart parking system, microcontroller, ultrasonic sensor, arduino

References


Rahmaniah, dkk. (2012). Sistem Informasi Parkir Menggunakan Sensor Infra Merah Terkendali Mikrokontroler AT89C51. Progresif Vol. 4(1), 401-416.

Ardianto, P. (2015). Perancangan Prototipt Sistem Parkir Cerdas Berbasis Mikrokontroler Atmega8535. Jurnal SAINTIKOM, Vol.14(2) 131-140.

Freeon, A. (2016). Implementasi Sistem Perpakiran Otomatis dengan Menentukan Posisi Parkir Berbasis RFId. Jurnal ELKOMIKA Vol. 4(1), 31-46.

Winoto, A. (2008). Mikrokontroler AVR ATMega8/32/26/8535 dan Pemrogramannya Dengan Bahasa C Pada WinAVR. Bandung: Informatika Bandung.

Sparkfun. (2015). Retrieved April 20, 2017, from Ultrasonic Sensor-HC–SR04: https://www.sprakfun.com/products/13959

Budiharto, W. (2010). Robotika Teori dan Implementasi. Yogyakarta: CV. Andi Offset.