Pengaruh Parameter Proses terhadap Kuat Tarik Produk Hasil 3d Printing Menggunakan Filamen ASA (Acrylonitrile Styrene Acrylate)

Wahyu Riyan Saputra, Zaldy Sirwansyah Suzen, Pristiansyah Pristiansyah

Abstract


3D Printing is an additive manufacturing technique that can be used to convert computer aided design (CAD) data and then print it by adding material layer by layer to form a 3D product. The FDM system is used for a 3D testing system because it is easy to use, the FDM system is also used as a rapid prototyping for making prototypes with polymer as the material. In this study the filament used was ASA (Acrylonitrile Styrene Acrylate) filament, the method used in this research to optimize process parameters was the Taguchi L9 OA method. The process parameters used are nozzle temperature, bed temperature, print speed, colling speed. This study aims to determine the tensile test stress strength of 3D printing product materials made from ASA (Acrylonitrile Styrene Acrylate) filaments with different parameters using the taguchi method and to find out how influential they are in printing with ASA filaments. The results showed that the optimal parameters for the tensile test using ASA (Acrylonitrile Styrene Acrylate) filaments were: nozzle temperature (240°C), bed temperature (50°C), print speed (60mm/s), colling speed (50°C) .


Keywords


3d printing; fused deposition modelling (FDM); ASA; uji tarik; metode taguchi

References


R. Febriansyah and A. Anggry, “Pengaruh Parameter Proses Terhadap Uji Impak Pada 3D Printing Material Abs,” vol. 2, no. 1, Feb 2022.

P. P. and H. H. A. Ferdiansyah, “Pengaruh Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE,” J. Teknol. Manufaktur, vol. 1, Sep 2022.

S. Y. Setiawan, “Pengaruh Temperatur Terhadap Kekuatan Tarik Dan Tekan Pada Proses Ekstrusi Di Mesin Printer 3D,” 2019.

P. and Y. O. Malinda Christiliana, “Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filament Eflex,” snitt, vol. 1, Jul 2021.

I. Soejanto, Desain Eksperimen dengan metode Taguchi. 2009.

H. and P. D. Andriyansyah, “Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Filament Polylactic Acid Menggunakan Metode Taguchi,” SEMINAR NASIONAL PENDIDIKAN TEKNIK OTOMOTIF, vol. 1, Mei 2018.

M. I. F. and P. Hasdiansah, “Optimasi Parameter Proses Terhadap Akurasi Dimensi Pla Food Grade Menggunakan Metode Taguchi,”,” Prosiding Seminar Nasional NCIET, vol. 1, 2020.

H. Zaldy Sirwansyah Suzen, “Pengaruh Geometri Infill terhadap Kekuatan Tarik Spesimen Uji Tarik ASTM D638 Type IV Menggunakan Filamen PLA+ Sugoi,” Rekayasa Mesin, vol. 16, no. 1411–6863, Agu 2021.

E. P. Rovi Avriansah, “OPTIMASI PARAMETER PROSES 3D PRINTING TERHADAP KEKUATAN TARIK FILAMENT POLYETHYLENE TEREPHTHALET GLYCOL,” SNITT, 2022.

B. , R. & W. Sugiantoro, “Optimasi Parameter Proses Milling Terhadap Kualtas Hasil Permesinan Alumunium Dengan Metode Taguchi,” vol. 1, Jan 2014.

Y. B. P. Pristiansyah. Hasdiansah, “Pengaruh Parameter Proses Slicing Software Terhadap Kekasaran Permukaan Printing Part Filamen ST-PLA,” SNITT, vol. 1, Jun 2021.

S. , D. S. & Y. Y. Lubis, “Pengaruh Orientasi Objek Pada Proses 3d Printing Bahan Polymer Pla Dan Abs Terhadap Kekuatan Tarik Dan Ketelitian Dimensi Produk.,” Sinergi, 2016.

P. and F. A. M. H. Bari, “OPTIMASI PARAMETER PROSES 3D PRINTING TERHADAP KEKUATAN TARIK FILAMEN PLA FOOD GRADE,” snitt, vol. 1, Feb 2021.

P. and D. R. Z. Hamzah, “PENGARUH CHAMBER PADA MESIN 3D PRINTING FDM TEHADAP HASIL PRODUK DENGAN MENGGUNAKAN FILAMEN ABS,” Seminar Nasional Inovasi Teknologi Terapan, vol. 2, Feb 2022.

Pristiansyah, “Optimasi Parameter proses 3D PrintingTerhadap Kuat Tarik FilamentPolylactic Menggunakan Metode Taguchi,” vol. 1, Mei 2018.




DOI: https://doi.org/10.32528/jp.v7i2.9285

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 J-Proteksion: Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats